	Solar Tracker Controller
	Universal Input Temperature Controller
	Universal Input Two-Set Point Temperature Controller
	Two-Set Point Temperature Controller
	Temperature Controller Cum Timer
	Universal Input Temperature Controller Cum Timer
	Profile Temperature Controller
	Scanner
	Digital Temperature Indicator
	Jumbo 4" Disply Indicator
	RH-Temperature Controller
	Thumb Wheel Timer
	Universal Timer
	Cyclic Timer
	Counter
	Loop Indicator
	Process Controller
	Single Set point Temperature Controller
	Flame Proof indicators & Controller
	Transmitter
	Temperature Sensors

Profile

Our family of products consists of: Temperature related instruments like Indicators, Single set point controllers, Two/Four set point controllers, transmitters, Temp. Sensors, Scanners Flame Proof Indicators and Controllers, Maxthermo make PID controllers etc. and general purpose instruments like Timers, Counters and Length meters, Cyclic Timers. In addition, we have developed customized instruments like, Temperature controller and Soak timer coupled in one unit (Temp-Time), RH -cum-Temperature controller, Process controller Profile Controllers, etc.

Universal Timers

Trigger Input :	Proximity S/W or Potential free contact.
Display :	2 x 4 digit, 0.56" RED
Memory Retention :	> 10 years
Supply :	230V /110V AC, + 10% 50/60Hz.
Count Direction :	Up / Down Selectable.
Range :	Selectable from 0.1 sec to 9999 min.
Power On Reset :	Selectable (Battery Backup)
Relay Logic :	On / off delay selectable
Input Logic :	Pulse/Gate trigger Logic selectable.
Reset Facility :	Provided on front and back plate
Output :	Relay 1 C/O, 5A / 10 A resistive.
Size :	72 x 72 x113mm.

Cyclic / Cycle Timer (Micro Controller Based)

For / Rev Time Range :	0-9999 mins.
Hold Time Range :	0-9999 seconds.
Display :	4 Digit (0.56") for elapsed time, 4 Digit (0.4") for set time.
Supply :	230 x AC / 110V AC, +10%, 50 / 60Hz.
For / Rev O / P :	Relay, 1C/O, 5A / 10A, resistive.
Size :	96 x 96 x 120 / 72 x 72 x 113mm.

Cyclic-cyclic timerr(4-in-1 timer)